Product Description
By using this device, you can monitor your cars from PC, Mac, iPhone, iPad, etc with a compatible software or you can even write your own software on a specified hardware platform if need, because the AT commands are fully documented and very well explained. With proper software installed in the host device, you can do inspection by yourself! It would save your money and time.
There are tons of software available, which are fully compatible with WIFI OBD interface, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.
• Vehicle Speed
• RPM
• Fuel Consumption
• Engine Coolant Temp
• Fuel Pressure
• Calculated Engine Load
• Throttle Position
• Intake Manifold Pressure
• Air Intake Temp
• Timing Advance
• Mass Air Flow
• Fuel Level
• Barometric Pressure
• EVAP System Vapor Pressure
• Fuel Trim
Some examples for iOS applications are Rev, FUZZYcar, DashCommand
Note: Your vehicle may not support all above parameters. How many parameters you can get is depended on the vehicle manufacturer's implementation.
Material: automotive grade plastic
Operating temperature: -15 to 100 Deg Celsius
SSID: WiFiOBD
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Item size: 9 * 5 * 3cm (3.5 * 2.0 * 1.2in)
Item weight: 75g/2.6oz
1 This WIFI interface support all OBDII Protocls.
2 This WIFI OBD interface are fully compatible with many software, such as such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.
3 SSID: OBDDevice, IP/Port: 192.168.0.10:35000, Antenna: Internal, Wifi Standard: 802.11a/b/g
4 Power Consumption: 0.75 Watts, Operating Temperature: -15 to 100 Celsius, Size: 15x13x4cm
5 Package including: 1x ELM 327 WIFI Diagnostic Reader Scanner
6 Works with all OBD-II compliant vehicles.
7 Works on all 1996 to 2010 cars and light trucks sold in the United States, some 1994 and 1995 models are also ok.
8 Software included in CD for Smartphone, PC and iOS (iPhone, iPad, iTouch, Mac).
9 Clear trouble codes and turn off the MIL ("Check Engine" light).
10 Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
How to see if your vehicle is comliant with OBD II?
Please pop the hood and look for a sticker named "VEHICLE EMISSION CONTORL INFORMATION".
• SAE J1850 PWM (41.6 kbaud)
• SAE J1850 VPW (10.4 kbaud)
• ISO 9141-2 (5 baud init, 10.4 kbaud)
• ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
• ISO 14230-4 KWP (fast init, 10.4 kbaud)
• ISO 15765-4 CAN (11 bit ID, 500 kbaud)
• ISO 15765-4 CAN (29 bit ID, 500 kbaud)
• ISO 15765-4 CAN (11 bit ID, 250 kbaud)
• ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Packing List:
• 1 x ELM327 WiFi Wireless OBD2 Interface
• 1 x Software CD
Technical Details:
• SSID: OBDDevice / CLKDevices
• IP/Port: 192.168.0.10:35000
• Antenna: Internal
• Power Consumption: 0.75 Watts
• Wifi Standard: 802.11a/b/g
• Operating Temperature: -15 to 100 Celsius
• Item size: 15x13x4cm
Item weight: 5.50oz
1 -Where can I get the software?
You can log on to the apple application store to get your commercial software, such as Dynolicious.
There is a freeware in the CD-ROM comes along with the device. You can use this piece of software to configure and test the WI-FI OBD AUTO CHECKER.
2 - Wifi Settings
Search wifi -- Connect to device (SSID: OBDDevice/CLKDevices)
Static Tab -- IP Address: 192.168.0.123 -- Subnet Mask: 255.255.255.0
3- Software Settings
Open Software (your iOS sofware (ex: Rev DashCommand, FuzzyCar ))
Settings: Interface type : ELM -- Data Port : tcp://192.168.0.10:35000
4- Have Fun
