Original Launch OBDII Code Reader V Scanner- CreaderV Code Scanner

Product Description

Launch CreaderV OBDII Code Reader

Launch CreaderV OBDII Code Reader Overview

CReader V (pronounced "see-reader five") is a stand-alone scan tool designed especially for car owners and DIY auto mechanics. It works with any OBD-II compliant vehicle, features automatic protocol detection, and supports the following functions:

• Diagnostic Codes:read and erase DTCs (both generic and manufacturer specific)
• Display and GraphReal Time Parameters
• ViewFreeze FrameData
• I/M Readiness
• MIL Status
• O2 SensorTest
• Evaporative SystemTest
• Vehicle Information(VIN, Calibration ID, Calibration verification number)

CreaderV OBDII Code Reader Key Features

• Stand aloneoperation
• Large backlit display (160x160 pixels).
• Automatic protocol detection
• Works with allOBD-II/EOBD/JOBDcompliant vehicles.
• Supportsall legislated OBD protocls:
  • ISO 15765-4 (CAN)
  • ISO 14230-4 (Keyword Protocol 2000)
  • ISO 9141-2 (Asian, European, Chrysler vehicles)
  • J1850 VPW (GM vehicles)
  • J1850 PWM (Ford vehicles)
• Supports four languages:
  • English
  • French
  • Spanish
  • German
• Free firmware upgrades

CReader V OBDII Code Reader Safety Precautions and Warnings:

To prevent personal injury or damage to vehicles and/or the CreaderV, please read this instruction manual first carefully and observe the following safety precautions at a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running.
Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires nearby.
Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
Keep the CreaderV dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of

Launch Launch CreaderV OBDII Code Reader Package Contents

• CReader V unit
• User's Manual
• USB cable (for firmware updates)
•  

Creader V Technical Specifications

• Display: Backlit LCD, 2.36×2.36 in (60×60 mm), 160×160 pixels
• Operating Temperature: 32 to 140 F° (0 to 60°C)
• Storage Temperature: -4 to 158 F° (-20 to 70°C)
• Power: 9 to 15 volts, supplied via the diagnostic connector
• Unit Dimensions: 126 mm×88 mm×22 mm (4.96×3.46×0.87 in)
• Package Weight: 12.5 oz (350 g)
• OBD Cable length: 30 in (75 cm)