PIN CODE READER for Chrysler Pin Code Reader Tool Auto Key Programmer

Product Description

Pin Code reading device for Chrysler ( TYPE2) Auto Key Programmer

Read data from Immobiliser controler and show the pin code on the screen of the device directly

1: Removing the IMMO box from the vehicle.The location is on the Ignition Lock
2:Desoldering the two pins of coil connection and removing the circuit from box.
3: To find an EEPROM "24LC02B"
4: Clear every pin of 24LC02B connect the clips with microchip,Black point to pin1 of 24LC02B.
5:Then press "Read Pin'button on the unit , The screen will show the "pin code".

Another way for reading pin code:
There is another cable(4wires) which comes with reading unit ti read the pin code without desoldering and removeing the circuit from the IMMO box.
White wire to Point1 , Black wire to point2,Blue wire to Point3 Red wire to point4
Then Press"Read Pin"button on the unit, The screen will show the "Pin Code".

Chrysler PIN CODE READER Function:
1.Read out Chrysler (TYPE2) vehicle pin cod
2.Read data from Immobilizer controller and show the pin code on the screen of the device directly.